When it comes to mounting your new Element TV on the wall, there are a few things to keep in mind. First, make sure the mount can accommodate your specific TV size. Second, consider what type of screw you’ll need to use. And finally, be sure to read the mounting instructions carefully before starting! To find out what screws are compatible with your TV, measure its width and height. You’ll need to use screws that are at least as wide as the width of your TV and at least as long as its height. For example, if your TV is 32 inches wide by 24 inches high, you’ll need screws that are at least 2 inches wide by 2 inches long. Once you’ve determined which screws you need, find a stud or joist in your wall and mark it with a pencil or a piece of tape. Then use the measurements you took to find the center of each screw hole on the stud or joist. Finally, drive the screws into the holes using a drill and appropriate bit. Make sure not to over-tighten the screws; they should only be tightened until they’re snug but not too tight that they cause damage to your TV or wall mount. If you’re using mounts that require drilling into drywall (rather than wood), be sure to use an appropriate bit for drilling through drywall – something like a 1/2 inch bit instead of a 3/8 inch bit – and wear safety goggles and gloves when drilling! ..
